Tile and Grout

Tile and Grout Cleaning FremontTILE AND GROUT CLEANING

Dirt trapped in the pores of your tile and grout can cause your surfaces to look dark and dirty and can be impossible to remove with traditional cleaning methods. B.A.R. cleaning method will help remove soils that normal dusting or damp mopping leave behind.

Applying protective sealers will provide the best defense against everyday stains. You can be certain that your tile,grout and stone will stay looking beautiful

How to test if your stone, tiles & grout are sealed?

Make sure surface area is clean, dry and free of waxes and coatings

Apply a tablespoon of water 1 inch in diameter to the stone surface

Allow the water to stand on the stone for 5-30 minutes

If surface is unsealed, the water will absorb into the stone and darken the surface (absorption speed will depend on porosity of the stone).

If surface is already sealed or if stone is very dense, the water will bead up and stand on the surface.

To prevent or limit staining problems in grout for ceramic tile, a grout sealer is recommended.

The grout is very porous (excluding the epoxy grout) if left unsealed it will be stained very easily. B.A.R. can restore the original look of you grout using powerful and at the same time safe cleaning solutions. B.A.R. recommends to seal your tile and grout after every restoration. This will guarantee you having beautiful looking floors for years with minimum floor maintenance .